3/32" 2FL SQ HSS END MILL

3/32" 2FL SQ HSS END MILL

SECN64037 N64037
20.80 / EA
http://schema.org/OutOfStock
3/32" 2FL SQ HSS END MILL
  • Cutter Diameter Decimal Inch: 0.09375, 3
  • Cutter Diameter Fractional Inch: 3, 3/32
  • Cutter Diameter Metric: 2.381, 76.2
  • Type: Center Cutting Double End Short Length Square End
  • Number of Flutes: 2
  • Length of Cut Decimal Inch: 0.140625
  • Length of Cut Fractional Inch: 9/64
  • Length of Cut Metric: 3.572
  • Overall Length Decimal Inch: 2
  • Overall Length Fractional Inch: 2
  • Overall Length Metric: 50.8
  • Material: High Speed Steel, HSS
  • Surface Treatment: TiN, TiN Coated
  • Helix Angle: 35 deg, 35°
  • Shank Diameter Decimal Inch: 0.1875
  • Shank Diameter Fractional Inch: 3/16
  • Shank Type: Cylindrical
  • Series: DS211
  • ANSI Code: DS211-0.094-XF2-S.0-Z2
  • ANSI Designation: DS211-0.094-XF2-S.0-Z2
  • Application: For slotting and pocket milling applicationsin all materials
  • Country of Origin: US
  • Flute Type: Spiral
  • Hand Direction: Right Hand
  • Has Attributes: Yes
  • Has Image: Yes
  • ISO Code: DS211.094XF2S.0Z2
  • ISO Designation: DS211.094XF2S.0Z2
  • Manufacturer Name: Seco Tools
QTY
Add to List
  • Application
  • Item Features
For slotting and pocket milling applications in all materials
  • High speed steel (HSS) provides good wear resistance, it is commonly used for general purpose applications on both ferrous and non-ferrous materials
  • Titanium nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials and the heat and hardness resistance allows the tool to run at higher speeds than uncoated tools
  • 90 deg cutting edge
  • 1.102 in L minimum clamping
  • 35 deg axial rake
  • 10 deg radial rake
  • 16 deg neck
  • 35 deg helix angle provides increased cutting action and chip evacuation compared to the standard 30 deg helix
  • Double-end end mills have cutting edges on both ends for longer tool life
  • Stub length increases the strength of the tool, making it less likely to break in the workpiece
  • Center cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling
  • F - Step tool shape
  • Square end creates sharp, unrounded cuts