3/4" Boss Clamp Bolt-MB6225, Nut-MN6

DIXBU9 MFG #: BU9
$10.81 / EA
  • Bolt Size: 9/16 in Hex
  • Inside Diameter: 3/4 in
  • Outside Diameter: 1-10/64 to 1-20/64 in
  • Series: Boss™
  • Torque Rating: 21 ft-lb
  • Width: 2-9/16 in
  • Length: 2-31/32 in
  • Band Material: Iron
  • Surface Treatment: Zinc Plated
QTY
  • Item Features
  • Recommended for steam service up to 450 deg F
  • Replacement nuts and bolts are available
  • Two gripping fingers and two clamps sections
  • The bolts used in the boss interlocking clamps are not standard bolts
  • They vary from standard bolts in their lengths, diameter, overall thread lengths and materials hardness
  • These bolts can be retorqued, but it is not recommended to reuse the bolts or clamps, as they are designed for a single bend only
  • Torque values for clamps are based on dry bolts
  • The use of lubricant on bolts will adversely effect clamps performance
  • Do not lubricate nuts and bolts
  • Bolts in boss clamps are designed to bend as they are tightened and this allows the clamps to conform to the hose outside diameter
  • Always tighten bolts to their specified torque values
  • Periodic re-tightening of bolts is required due to "cold flow" phenomenon present in all rubber hoses
  • Boss clamps are for single use only, once removed they are to be discarded
  • Warning: this products contains a chemicals known to the State of California to caused birth defects or other reproductive harm
  • Do not use in connections with drinking water
  • Wash hands after handling
  • Global investment cast carbon steel
  • http://www.youtube.com/watch?v=opJzyrWzvjw&list=PL10BD55ADAF8