/seco_new_150x150.jpg?width=150&height=150)
END MILL REC700 TICN
END MILL REC700 TICN
SEC17016594
17016594
122.36
/ EA
http://schema.org/OutOfStock
/Product/SEC17016594
- Type: Center Cutting Medium Length Single End Square End
- Cutter Diameter Decimal Inch: 0.875, 7
- Cutter Diameter Fractional Inch: 7, 7/8
- Cutter Diameter Metric: 177.8, 22.225
- Flute Type: Coarse Pitch/Spiral
- Number of Flutes: 5
- Helix Angle: 30 deg, 30°
- Length of Cut Decimal Inch: 1.875
- Length of Cut Fractional Inch: 1-7/8
- Length of Cut Metric: 47.625
- Overall Length Decimal Inch: 4.125
- Overall Length Fractional Inch: 4-1/8
- Overall Length Metric: 104.775
- Material: M42 8% Cobalt
- Surface Treatment: TiCN Coated
- Shank Diameter Decimal Inch: 0.75
- Shank Diameter Fractional Inch: 3/4
- Shank Type: WELDON FLAT
- Series: REC700
- ANSI Code: REC700-0.875-P3-C030.3-Z5
- Country of Origin: US
- Hand Direction: Right Hand
- Has Attributes: Yes
- Has Image: Yes
- ISO Code: REC700.875P3C030.3Z5
- Manufacturer Name: Seco Tools
- Application
- Item Features
General Purpose Applications
- Cobalt is harder than high speed steel and provides better wear resistance, it is commonly used on high tensile alloys
- Titanium carbonitride (TiCN) is harder and more wear resistant than TiN and is commonly used on stainless steels, cast iron and aluminum alloys
- 90 deg cutting edge
- 0.03 in W corner chamfer
- 2.031 in L minimum clamping
- 30 deg axial rake
- 10 deg radial rake
- They are used at reduced speeds for general applications on non-ferrous metals
- Number of flutes varies by diameter for optimum feed and cut rate
- 45 deg corner chamfer
- Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills
- P - Tool shape
- Square end creates sharp, unrounded cuts and has a corner chamfer to strengthen the cutting edges