END MILL REC700 TICN

END MILL REC700 TICN

SEC17016587 17016587
70.83 / EA
http://schema.org/OutOfStock
END MILL REC700 TICN
  • Type: Center Cutting Short Length Single End Square End
  • Cutter Diameter Decimal Inch: 0.5625, 9
  • Cutter Diameter Fractional Inch: 9, 9/16
  • Cutter Diameter Metric: 14.287, 228.6
  • Flute Type: Coarse Pitch/Spiral
  • Number of Flutes: 4
  • Helix Angle: 30 deg, 30°
  • Length of Cut Decimal Inch: 1.375
  • Length of Cut Fractional Inch: 1-3/8
  • Length of Cut Metric: 34.925
  • Overall Length Decimal Inch: 3.375
  • Overall Length Fractional Inch: 3-3/8
  • Overall Length Metric: 85.725
  • Material: M42 8% Cobalt
  • Surface Treatment: TiCN Coated
  • Shank Diameter Decimal Inch: 0.5
  • Shank Diameter Fractional Inch: 1/2
  • Shank Type: WELDON FLAT
  • Series: REC700
  • ANSI Code: REC700-0.563-P2-C025.3-Z4
  • Country of Origin: US
  • Hand Direction: Right Hand
  • Has Attributes: Yes
  • Has Image: Yes
  • ISO Code: REC700.563P2C025.3Z4
  • Manufacturer Name: Seco Tools
QTY
Add to List
  • Application
  • Item Features
General Purpose Applications
  • Cobalt is harder than high speed steel and provides better wear resistance, it is commonly used on high tensile alloys
  • Titanium carbonitride (TiCN) is harder and more wear resistant than TiN and is commonly used on stainless steels, cast iron and aluminum alloys
  • 90 deg cutting edge
  • 0.025 in W corner chamfer
  • 1.781 in L minimum clamping
  • 30 deg axial rake
  • 10 deg radial rake
  • They are used at reduced speeds for general applications on non-ferrous metals
  • Number of flutes varies by diameter for optimum feed and cut rate
  • 45 deg corner chamfer
  • Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills
  • P - Tool shape
  • Square end creates sharp, unrounded cuts and has a corner chamfer to strengthen the cutting edges