• Rounded edges without T-land enables smooth machining with light feed and shallow depths of cut delivering sufficient edge strength while limiting the risk of work-hardening
• 3-D chip-breaker ensures chip-breaking control at wide range of feeds and depths of cut
• Medium width chip-groove reduces the cutting -resistance and vibration, hence increase machining performance
• Shallow chip-groove ensures chip-breaking at wide range of cutting feeds
• Raised chip-breaker back wall height forces the chip to curl more tightly which improves the ability to chip-break allowing machining of tough work-materials with lower feeds
• Neutral geometry increases the impact -resistance of the insert enhancing the ability to machine with heavier feed and higher depth of cut
• WC-Co based substrate submicron grained, provides high hardness and abrasive wear-resistance, -resistance against comb cracks
• PVD coating, enhances thermal cracking--resistance and performance in operations involving cutting temperature fluctuations
• A multi-layered PVD coating optimized for increased productivity and durability
• Thick TiN coated with low compressive stress for crater wear-resistance and hard AlTiN layer for flank wear-resistance
• Unique titanium-boron-nitride (TiBN) top layer for build-up edge reduction and improved performance
• New coating generation provides increased durability and performance
• It is the most versatile grade for general turning and heavy roughing, even in unfavorable conditions

FAR: 223.7306|48 CFR 252.223-7008 Prohibition of Hexavalent Chromium|PROP65: Cancer and Reproductive Harm - www.P65warnings.ca.gov|RoHS Directives EU 2015/863/2017/2102