• Rounded edges without T-land enables smooth machining with light feed and shallow depths of cut delivering sufficient edge strength while limiting the risk of work-hardening
• Medium width chip-groove reduces the cutting -resistance and vibration, hence increase machining performance
• Shallow chip-groove ensures chip-breaking at wide range of cutting feeds
• Raised chip-breaker back wall height forces the chip to curl more tightly which improves the ability to chip-break allowing machining of tough work-materials with lower feeds
• Positive geometry reduces the cutting forces, temperature and power requirement, exerting less stress on the workpiece, tool and machine spindle which helps to control chatter
• Wiper design ensures the minor cutting edge is kept in contact with the machined surface long enough to improve finish quality or to reduce the cycle time by increasing the feed while maintaining surface finish
• WC-Co based substrate submicron grained, provides high hardness and abrasive wear-resistance, -resistance against comb cracks
• PVD coating, enhances thermal cracking--resistance and performance in operations involving cutting temperature fluctuations
• A multi-layered PVD coating optimized for increased productivity and durability
• Thick TiN coated with low compressive stress for crater wear-resistance and hard AlTiN layer for flank wear-resistance
• Unique titanium-boron-nitride (TiBN) top layer for build-up edge reduction and improved performance
• New coating generation provides increased durability and performance
• It is the most versatile grade for general turning and heavy roughing, even in unfavorable conditions

FAR: 223.7306|48 CFR 252.223-7008 Prohibition of Hexavalent Chromium|PROP65: Cancer and Reproductive Harm - www.P65warnings.ca.gov|RoHS Directives EU 2015/863/2017/2102