ECMW 2.521:H07 TURNING INSERT - POSITIVE
ECMW 2.521:H07 TURNING INSERT - POSITIVE
PRA7168664
7168664
6.01
/ EA
http://schema.org/OutOfStock
/Product/PRA7168664
- Applicable Materials: Aluminum, Cast Iron, Stainless Steel, Steel and Titanium/Super Alloys
- Corner Radius: 0.4mm
- Included Angle: 75°
- Inscribed Circle: 5/16in
- Insert Size: 2.521
- Insert Style: ECMW
- ISO Code: ECMW 080304 H07
- Material: Carbide
- Material Grade: K, M, N, P, S
- Rake: Positive
- Relief Angle: 7°
- Seat Size: 8
- Shape: Diamond
- Surface Treatment: UNCOATED
- Thickness: 1/8in
- ANSI Code: ECMW 2.521 H07
- Has Attributes: Yes
- Has Image: Yes
- Manufacturer Grade: H07
Single-sided positive turning insert, 75° rhomboid with 7° clearance, inscribed circle diameter of 7.94mm, 3.18mm thick, 0.4mm nose radius and indexing accuracy according to ISO-tolerance class-M, in grade H07, an uncoated WC-Co carbide within ISO range K10-K25, for fine to medium machining of cast-irons
- Item Features
- Standards
- H07 grade special uncoated material for turning titanium and its alloys
- Fine grain substrate with low cobalt content
- High abrasion resistance
- Resistance to pitting on the cutting face when machining titanium and its alloys
- Resistance to plastic deformation
- Also suitable for the machining of non-ferrous metals and cast iron
- H type fine grain material (without cubic carbides) with low cobalt bonding phase content
- Special grade for machining titanium alloys
- Small to medium cross sections of chip
- Suitable for continuous to slightly interrupted cut
PROP65: This product contains chemicals known to the State of California to cause cancer. For more information: www.P65Warnings.ca.gov