PRA7168592 MFG #: 7168592
$140.08 / PK (10)
  • Manufacturer Grade: T6310
  • Insert Style: VCGT
  • Insert Size: 1.21.51
  • Inscribed Circle Size: 3.97 mm
  • Insert Seat Size: 7
  • Corner Radius: 0.4mm
  • Chipbreaker: SF3
  • Surface Treatment: CVD Coated
  • ANSI Designation: VCGT 1.21.51-SF3 T6310
  • Application: Finishing Applications
  • Attributes (Y): Y
  • For Use On: Hardened Steel, Cast Iron, Stainless Steel, Aluminum, Steel and Titanium, Super Alloys
  • Hole Diameter: 2.2mm
  • Image (Y): Y
  • Included Angle: 35°
  • ISO Designation: VCGT 070204E-SF3 T6310
  • Material: Carbide
  • Material Grade: H, K, M, N, P, S
  • Maximum Depth of Cut: 1.8 mm
  • Rake: Positive
  • Relief Angle:
  • Shape: Diamond
  • Thickness: 2.38 mm
Single-sided positive turning insert, 35° rhomboid with 7° clearance, inscribed circle diameter of 3.97mm, 2.38mm thick, 0.4mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SF3 with rounded cutting edges, in grade T6310, a PVD coated extra fine grained WC-Co carbide within ISO ranges M01-M15 and S01-S15, for fine to medium machining of stainless-steels and super-alloys
Pack: 10/PK
  • Item Features
  • T6310 grade high reliability due to special new sintering process
  • Can potentially be used in unstable conditions
  • Suitable for turning, with an indexing accuracy to ISO tolerance class-G and chipbreakers on one side only
  • SF3 chipbreaker - peripherally ground inserts
  • Sharp cutting edge with minimal edge radius
  • For small and slender components
  • High process security
  • Broad assortment of inserts covers wide range of applications
  • Low cutting forces prevent work hardening
  • Excellent surface finish
  • Versatile chipbreaker
  • High wear resistance (new substrate with high strength and hardness)
  • Positive inclined cutting edge prevents damaging the machined surface
  • PVD coating using triple coating technology, multilayer TiAlN + top layer AlTiSiN with high hardness
  • High strength and reliability of the insert during continuous cut
  • Excellent durability of the inserts for higher cutting speeds
  • Type H ultra submicron substrate
  • Medium cobalt bonding phase content
  • Cutting edge is extremely strong and stable
  • Suitable for applications that require coolant and also for dry machining