VCGT 1.21.50.5-SF3:T6310 TURNING INSERT - POSITIVE
PRA7168591
MFG #: 7168591
$139.40
/ PK (10)
- Manufacturer Grade: T6310
- Insert Style: VCGT
- Insert Size: 1.21.50.5
- Inscribed Circle Size: 3.97 mm
- Insert Seat Size: 7
- Corner Radius: 0.2mm
- Chipbreaker: SF3
- Surface Treatment: CVD Coated
- ANSI Designation: VCGT 1.21.50.5-SF3 T6310
- Application: Finishing Applications
- Attributes (Y): Y
- For Use On: Hardened Steel, Cast Iron, Stainless Steel, Aluminum, Steel and Titanium, Super Alloys
- Hole Diameter: 2.2mm
- Image (Y): Y
- Included Angle: 35°
- ISO Designation: VCGT 070202E-SF3 T6310
- Material: Carbide
- Material Grade: H, K, M, N, P, S
- Maximum Depth of Cut: 1.6 mm
- Rake: Positive
- Relief Angle: 7°
- Shape: Diamond
- Thickness: 2.38 mm
Single-sided positive turning insert, 35° rhomboid with 7° clearance, inscribed circle diameter of 3.97mm, 2.38mm thick, 0.2mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SF3 with rounded cutting edges, in grade T6310, a PVD coated extra fine grained WC-Co carbide within ISO ranges M01-M15 and S01-S15, for fine to medium machining of stainless-steels and super-alloys
- Item Features
- T6310 grade high reliability due to special new sintering process
- Can potentially be used in unstable conditions
- Suitable for turning, with an indexing accuracy to ISO tolerance class-G and chipbreakers on one side only
- SF3 chipbreaker - peripherally ground inserts
- Sharp cutting edge with minimal edge radius
- For small and slender components
- High process security
- Broad assortment of inserts covers wide range of applications
- Low cutting forces prevent work hardening
- Excellent surface finish
- Versatile chipbreaker
- High wear resistance (new substrate with high strength and hardness)
- Positive inclined cutting edge prevents damaging the machined surface
- PVD coating using triple coating technology, multilayer TiAlN + top layer AlTiSiN with high hardness
- High strength and reliability of the insert during continuous cut
- Excellent durability of the inserts for higher cutting speeds
- Type H ultra submicron substrate
- Medium cobalt bonding phase content
- Cutting edge is extremely strong and stable
- Suitable for applications that require coolant and also for dry machining