DCGT 21.51-SF3:H07 TURNING INSERT - POSITIVE
DCGT 21.51-SF3:H07 TURNING INSERT - POSITIVE
PRA7168559
7168559
8.71
/ EA
http://schema.org/OutOfStock
/Product/PRA7168559
- Chipbreaker: SF3
- Corner Radius: 0.4mm
- Hole Diameter: 0.114in
- Included Angle: 55°
- Inscribed Circle: 1/4in
- Insert Size: 21.51
- Insert Style: DCGT
- ISO Code: DCGT 070204E-SF3 H07
- Material: Carbide
- Maximum Depth of Cut Decimal Inch: 0.079
- Maximum Depth of Cut Metric: 2.0
- Rake: Positive
- Relief Angle: 7°
- Seat Size: 7
- Shape: Diamond
- Surface Treatment: UNCOATED
- Thickness: 3/32in
- Type: 0.307in
- ANSI Code: DCGT 21.51-SF3 H07
- Has Attributes: Yes
- Has Image: Yes
- Manufacturer Grade: H07
Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 6.35mm, 2.38mm thick, 0.4mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SF3 with rounded cutting edges, in grade H07, an uncoated WC-Co carbide within ISO range S01-S20, for fine to medium machining of super-alloys
- Application
- Item Features
- Standards
Finishing Applications
- H07 grade special uncoated material for turning titanium and its alloys
- Fine grain substrate with low cobalt content
- High abrasion resistance
- Resistance to pitting on the cutting face when machining titanium and its alloys
- Resistance to plastic deformation
- Also suitable for the machining of non-ferrous metals and cast iron
- H type fine grain material (without cubic carbides) with low cobalt bonding phase content
- Special grade for machining titanium alloys
- Small to medium cross sections of chip
- Suitable for continuous to slightly interrupted cut
PROP65: This product contains chemicals known to the State of California to cause cancer. For more information: www.P65Warnings.ca.gov