SNMG 432-SF:T9325 TURNING INSERT - NEGATIVE
SNMG 432-SF:T9325 TURNING INSERT - NEGATIVE
PRA7035065
7035065
11.16
/ EA
http://schema.org/OutOfStock
/Product/PRA7035065
- Applicable Materials: Stainless Steel, Steel, Cast Iron and Titanium/Super Alloys
- Chipbreaker: SF
- Corner Radius: 0.8mm
- Hole Diameter: 0.203in
- Included Angle: 90°
- Inscribed Circle: 1/2in
- Insert Size: 432
- Insert Style: SNMG
- ISO Code: SNMG 120408E-SF:T9325
- Material: Carbide
- Material Grade: K, M, P, S
- Maximum Depth of Cut Decimal Inch: 0.118
- Maximum Depth of Cut Metric: 3.0
- Rake: Negative
- Relief Angle: 0°
- Seat Size: 12
- Shape: Squared
- Surface Treatment: CVD Coated
- Thickness: 3/16in
- Type: 1/2in
- ANSI Code: SNMG 432-SF:T9325
- Has Attributes: Yes
- Has Image: Yes
- Manufacturer Grade: T9325
- Width: 1/2in
Double-sided negative turning insert, square with inscribed circle diameter of 12.7mm, 4.76mm thick, 0.8mm nose radius, indexing accuracy according to ISO-tolerance class-M, chip-breaker SF with rounded cutting edges, in grade T9325, a MT-CVD coated functionally graded WC-Co carbide within ISO range M10-M30, for fine to medium machining of stainless-steels
- Application
- Item Features
- Standards
Fine Turning and Finishing
- T9325 grade functionally gradient substrate
- Relatively low content of cobalt binder phase
- Thick MT-CVD coating
- Highly versatile material with very good operational reliability
- Special surface finish for coating
- Medium and higher cutting speed
- Continuous and interrupted cut
- Unfavorable cutting conditions, continuous and/or interrupted cuts
- Cutting geometry suitable for grooving and axial turning
- SF chipbreaker - sharp positive geometry with inclination cutting edge
- Very low cutting forces
- Continuous cut
- Suitable for materials with poor machinability, such as stainless steels, mild steels and high temperature alloys
PROP65: This product contains chemicals known to the State of California to cause cancer. For more information: www.P65Warnings.ca.gov