TURNING INSERT-HEAVY DUTY/RAILWAY LN.X 19, LN.X 30
TURNING INSERT-HEAVY DUTY/RAILWAY LN.X 19, LN.X 30
PRA6798523
6798523
327.38
/ PK (10)
http://schema.org/OutOfStock
/Product/PRA6798523
- Applicable Materials: Cast Iron, Stainless Steel, Steel and Titanium/Super Alloys
- Chipbreaker: TF
- Corner Radius: 4mm
- Hole Diameter: 6.35mm
- Included Angle: 90°
- Inscribed Circle: 19.05mm
- Insert Size: 191940
- Insert Style: LNMX
- ISO Code: LNMX 191940SN-TF T9325
- Material: Carbide
- Material Grade: K, M, P, S
- Maximum Depth of Cut Decimal Inch: 0.315
- Maximum Depth of Cut Metric: 8.0
- Rake: Negative
- Relief Angle: 0°
- Seat Size: 19
- Shape: Rectangle
- Surface Treatment: CVD Coated
- Thickness: 10mm
- Type: 19.05mm
- Manufacturer Grade: T9325
- Has Attributes: Yes
- Has Image: Yes
- Width: 19.05mm
Special design negative turning insert, rectangular with a main edge length of 19.05mm, 4mm nose radius, indexing accuracy according to ISO-tolerance class-M, chip-breaker TF with rounded cutting edges with facet, in grade T9325, a MT-CVD coated functionally graded WC-Co carbide within ISO range P15-P35, for heavy to medium machining of steels
- Application
- Item Features
- Standards
Finishing and Roughing
- T9325 grade functionally gradient substrate
- Relatively low content of cobalt binder phase
- Thick MT-CVD coating
- Highly versatile material with very good operational reliability
- Special surface finish for coating
- Medium and higher cutting speed
- Continuous and interrupted cut
- Unfavorable cutting conditions, continuous and/or interrupted cuts
- Cutting geometry suitable for grooving and axial turning
- For fine turning and finishing
PROP65: This product contains chemicals known to the State of California to cause cancer. For more information: www.P65Warnings.ca.gov