PRA6756214 MFG #: 6756214
$153.00 / PK (10)
  • Manufacturer Grade: T8315
  • Insert Style: VCGX
  • Insert Size: 2.52
  • Inscribed Circle Size: 7.94 mm
  • Insert Seat Size: 13
  • Corner Radius: 0.1mm
  • Chipbreaker: FF2
  • Surface Treatment: CVD Coated
  • ANSI Designation: VCGX 130300FL-FF2:T8315
  • Application: Fine Finishing Applications
  • Attributes (Y): Y
  • For Use On: Hardened Steel, Cast Iron, Stainless Steel, Aluminum, Steel and Titanium, Super Alloys
  • Hole Diameter: 3.4mm
  • Image (Y): Y
  • Included Angle: 35°
  • ISO Designation: VCGX 130301FL-FF2 T8315
  • Material: Carbide
  • Material Grade: H, K, M, N, P, S
  • Maximum Depth of Cut: 1.5 mm
  • Rake: Positive
  • Relief Angle:
  • Shape: Diamond
  • Thickness: 3.18 mm
Special design positive turning insert, 35° rhomboid with 7° clearance, inscribed circle diameter of 7.94mm, 3.18mm thick, nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker FF2 with sharp cutting edges, in grade T8315, a PVD coated fine grained WC-Co carbide within ISO range K05-K25, for fine to medium machining of cast-irons with a left handed turning tool
Pack: 10/PK
  • Item Features
  • T8315 grade highly abrasion resistant material of the T8300 series with guaranteed strength
  • FF2 chipbreaker - positive geometry with low cutting resistance
  • Improved cutting edge stability
  • Straight cutting edge
  • Very good chip control at low feed and depth of cut
  • High quality of surface finish
  • Increased performance and tool life in combination with the upgrade grades
  • Especially for small and slender components
  • Sub-micron substrate with a relatively low cobalt content
  • Nano-layered PVD coating with gradient transitions
  • Lower internal coating tension with higher hardness
  • Lower notch wear on the main cutting edge
  • Higher cutting speeds
  • Medium chip cross sections
  • Stable machining conditions
  • Suitable for turning, with an indexing accuracy to ISO tolerance class-G and according special design