WCGT 1.210.5-FF2:HF7 TURNING INSERT - POSITIVE

WCGT 1.210.5-FF2:HF7 TURNING INSERT - POSITIVE

PRA6756166 6756166
7.28 / EA
http://schema.org/OutOfStock
  • Applicable Materials: Hardened Steel, Cast Iron, Stainless Steel, Aluminum and Titanium/Super Alloys
  • Chipbreaker: FF2
  • Corner Radius: 0.2mm
  • Included Angle: 80°
  • Insert Size: 1.210.5
  • Insert Style: WCGT
  • ISO Code: WCGT 020102E-FF2 HF7
  • Material: Carbide
  • Material Grade: H, K, M, N, S
  • Maximum Depth of Cut: 1.4mm
  • Rake: Positive
  • Relief Angle:
  • Seat Size: 2
  • Shape: Trigon
  • Surface Treatment: PCD Coated
  • Manufacturer Grade: HF7
  • ANSI Code: WCGT 1.210.5-FF2 HF7
  • Has Attributes: Yes
  • Has Image: Yes
Single-sided positive turning insert, 80° trigon with 7° clearance, inscribed circle diameter of 3.97mm, 1.59mm thick, 0.2mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker FF2 with rounded cutting edges, in grade HF7, an uncoated fine grained WC-Co carbide within ISO range K10-K25, for fine to medium machining of cast-irons
Pack: 10/PK
QTY
  • Application
  • Item Features
  • Standards
Fine Finishing Applications
  • HF7 grade sub-micron material without cubic carbides (type H) and with a low cobalt content
  • Very versatile in terms of machined materials
  • Small to medium chip cross sections
  • Suited to stable machining conditions
  • Suitable for turning, with an indexing accuracy to ISO tolerance class-G and chipbreakers on one side only
  • FF2 chipbreaker - positive geometry with low cutting resistance
  • Improved cutting edge stability
  • Straight cutting edge
  • Very good chip control at low feed and depth of cut
  • High quality of surface finish
  • Increased performance and tool life in combination with the upgrade grades
  • Especially for small and slender components
PROP65: This product contains chemicals known to the State of California to cause cancer. For more information: www.P65Warnings.ca.gov