WNMA 432S:T5305 TURNING INSERT - NEGATIVE
WNMA 432S:T5305 TURNING INSERT - NEGATIVE
PRA6755918
6755918
106.56
/ PK (10)
http://schema.org/OutOfStock
/Product/PRA6755918
- Applicable Materials: Hardened Steel, Cast Iron and Steel
- Corner Radius: 1/32in
- Hole Diameter: 0.203in
- Included Angle: 80°
- Inscribed Circle: 1/2in
- Insert Size: 432
- Insert Style: WNMA
- ISO Code: WNMA 080408S T5305
- Material: Carbide
- Material Grade: H, K, P
- Maximum Depth of Cut Decimal Inch: 0.173
- Rake: Negative
- Relief Angle: 0°
- Seat Size: 8
- Shape: Trigon
- Surface Treatment: CVD Coated
- Thickness: 3/16in
- Manufacturer Grade: T5305
- ANSI Code: WNMA 432S T5305
- Has Attributes: Yes
- Has Image: Yes
Double-sided negative turning insert, 80° trigon with inscribed circle diameter of 12.7mm, 4.76mm thick, 0.8mm nose radius, indexing accuracy according to ISO-tolerance class-M with rounded cutting edges with facet, in grade T5305, a MT-CVD coated WC-Co carbide within ISO range K01-K15, for fine to heavy machining of cast-irons
- Item Features
- Standards
- T5305 grade fine grained substrate with a low cobalt content
- Thick layer of MT-CVD coating with a layer of Al2O3 on the surface
- Special finish for coating
- Top performance for machining gray cast iron
- Material with the highest abrasion resistance of the 5300 series
- High cutting speeds
- Continuous and slightly interrupted cut
- Suitable for turning, with an indexing accuracy to ISO tolerance class-M and without chipbreakers
PROP65: This product contains chemicals known to the State of California to cause cancer. For more information: www.P65Warnings.ca.gov