SNMM 866-923:T8345 TURNING INSERT - NEGATIVE
SNMM 866-923:T8345 TURNING INSERT - NEGATIVE
PRA6753694
6753694
49.30
/ EA
http://schema.org/OutOfStock
/Product/PRA6753694
- Applicable Materials: Stainless Steel, Steel, Cast Iron and Titanium/Super Alloys
- Chipbreaker: 923
- Corner Radius: 2.4mm
- Hole Diameter: 9.12mm
- Included Angle: 90°
- Inscribed Circle: 25.4mm
- Insert Size: 866
- Insert Style: SNMM
- ISO Code: SNMM 250924S-923:T8345
- Material: Carbide
- Material Grade: K, M, P, S
- Maximum Depth of Cut Decimal Inch: 0.63
- Maximum Depth of Cut Metric: 16.0
- Rake: Negative
- Relief Angle: 0°
- Seat Size: 25
- Shape: Squared
- Surface Treatment: PVD Coated
- Thickness: 9.52mm
- Type: 25.4mm
- ANSI Code: SNMM 866S-923:T8345
- Country of Origin: CZ
- Has Attributes: Yes
- Has Image: Yes
- Manufacturer Grade: T8345
- Manufacturer Name: Dormer Pramet
- Width: 25.4mm
Single-sided negative turning insert, square with inscribed circle diameter of 25.4mm, 9.52mm thick, 2.4mm nose radius, indexing accuracy according to ISO-tolerance class-M, chip-breaker 923 with rounded cutting edges with facet, in grade T8345, a PVD coated fine grained WC-Co carbide, for heavy to extra heavy machining
- Item Features
- Standards
- T8345 grade the toughest member of the T8300 series
- Sub-micron substrate with a high cobalt content
- Nano-layered PVD coating with gradient transitions
- Lower internal coating tension with higher hardness
- Lower notch wear on the main cutting edge
- Lower to medium cutting speeds and bigger chip cross sections
- Good operative reliability
- Interrupted cut, unstable machining conditions
PROP65: This product contains chemicals known to the State of California to cause cancer. For more information: www.P65Warnings.ca.gov