5/16-18 H5 3FL BTM TAP
5/16-18 H5 3FL BTM TAP
OSG5004700
5004700
19.56
/ EA
http://schema.org/OutOfStock
/Product/OSG5004700
- Chamfer: 1.5P-2P Bottoming
- Hand Direction: Right Hand
- Material: HSS
- Number of Flutes: 3
- Overall Length Decimal Inch: 2.72
- Overall Length Metric: 69.088
- Series: 107
- Shank Diameter Decimal Inch: 0.317
- Surface Treatment: Bright
- Thread Length Decimal Inch: 0.708
- Thread Limit: H5
- Thread Size: 5/16-18
- Thread Standard: UNC
- Through Coolant (Yes/No): No
- Type: General Purpose
- Applicable Materials: Ferrous and Non-Ferrous Metals
- Flute Direction: Right Hand
- Has Attributes: Yes
- Has Image: Yes
- System of Measurement: Imperial
Taps are used to cut screw threads on the inside surfaces of holes, creating the "female" half (nut) of the screw. High precision is of vital importance, particularly in areas such as automobile engines, which require precision screws. OSG offers a lineup of taps with diameters in various sizes and with specifications suitable for a wide variety of uses.
- Application
- Item Features
- Standards
- Recommended Speeds
For blind hole applications
- Spiral flute taps utilize a helical flute
PROP65: When grinding or regrinding industrial cutting tools, residual grinding dust may occur. This dust may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
| Workpiece material | Suitability | Cutting speed (SFM) |
|---|---|---|
| P — Steel | ||
| High Carbon Steel: 1065 | Good | 20 – 45 |
| Low Carbon Steel: 1010; 1018 | Good | 25 – 80 |
| Medium Carbon Steel: 1035; 1045 | Good | 20 – 50 |
| K — Cast Iron | ||
| Cast Iron | Good | 25 – 75 |
| N — Non-Ferrous | ||
| Aluminum: 6061; 7075 | Good | 40 – 80 |
| Aluminum: Casting | Good | 40 – 65 |
Speeds and suitability ratings supplied by OSG for the OSG SFT series. Starting values — adjust for your setup, coolant and workholding rigidity.