3/4-14 NPT EXO-TAP-MOLD TAP
3/4-14 NPT EXO-TAP-MOLD TAP
OSG1736400
1736400
227.26
/ EA
http://schema.org/OutOfStock
/Product/OSG1736400
- Chamfer: 2.5P Modified Bottoming
- Material: HSS-Co
- Number of Flutes: 5
- Overall Length Decimal Inch: 3.25
- Overall Length Fractional Inch: 3-1/4
- Overall Length Metric: 82.55
- Series: 328
- Shank Diameter Decimal Inch: 0.906
- Shank Diameter Fractional Inch: 29/32
- Square Size Decimal Inch: 0.679
- Square Size Metric: 17.247
- Surface Treatment: Bright
- Thread Length Decimal Inch: 1.374
- Thread Length Fractional Inch: 1-3/8
- Thread Size: 3/4-14
- Thread Standard: NPT
- Type: High Performance
- Hand Direction: Right Hand
- Has Attributes: Yes
- Has Image: Yes
- System of Measurement: Imperial
EXOTAP-MOLD® is the premium pipe tap solution for threading die steels such as P20 and H13.
- Application
- Item Features
- Standards
- Recommended Speeds
For standard NPT tapered pipe applications
- HSS-CO material - increased toughness and wear resistance
REACH EU Regulation Article 33 No. 1907/2006|RoHS Directive EU 2015/863|WEEE 2002/96/EC|PROP65: When grinding or regrinding industrial cutting tools, residual grinding dust may occur. This dust may contain chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
| Workpiece material | Suitability | Cutting speed (SFM) |
|---|---|---|
| P — Steel | ||
| Alloy Steels: 4140; 4340 | Best | 10 – 25 |
| Die Steels | Best | 10 – 15 |
| High Carbon Steel: 1065 | Good | 10 – 20 |
| Low Carbon Steel: 1010; 1018 | Good | 15 – 40 |
| Medium Carbon Steel: 1035; 1045 | Good | 10 – 25 |
| M — Stainless Steel | ||
| Stainless Steels: 17-4PH | Good | 8 – 12 |
| Stainless Steels: 300 | Good | 10 – 25 |
| Stainless Steels: 400 | Good | 10 – 25 |
| H — Hardened Steel | ||
| Hardened Steels: 35 HRC | Best | 10 – 20 |
| Hardened Steels: 35-45 HRC | Good | 8 – 12 |
Speeds and suitability ratings supplied by OSG for the EXOTAP MOLD series. Starting values — adjust for your setup, coolant and workholding rigidity.