1/4-28 STI H2 3SP PLUG EXO-TAP VC10 TAP
1/4-28 STI H2 3SP PLUG EXO-TAP VC10 TAP
OSG1715401
1715401
53.86
/ EA
http://schema.org/OutOfStock
/Product/OSG1715401
- Chamfer: Plug
- Class of Fit: 3B
- Material: Powder Metal
- Number of Flutes: 3
- Overall Length Decimal Inch: 2.71875
- Overall Length Fractional Inch: 2-23/32
- Overall Length Metric: 69.056
- Series: 314
- Shank Diameter Decimal Inch: 0.318
- Square Size Decimal Inch: 0.238
- Square Size Metric: 6.045
- Surface Treatment: Steam Oxide
- Tap Drill Size: 0.257 to 0.264in
- Thread Length Decimal Inch: 1.125
- Thread Length Fractional Inch: 1-1/8
- Thread Size: 1/4-28
- Thread Standard: UNF
- Type: High Performance Spiral Point
- Hand Direction: Right Hand
- Has Attributes: Yes
- Has Image: Yes
- System of Measurement: Imperial
- Application
- Item Features
- Standards
- Recommended Speeds
Aerospace, Medical, Oil, Gas and Through Hole Applications
- Increased wear resistance
- S/O increases mechanical lubricity
- Increased hardness, lubricity and wear resistance
- Repair stripped threaded holes
- Alloy steels, SS 17-4PH, hardened steel 35 HRc die steels, titanium, inconel, SS 400, hardened steel 35 to 45 HRc applicable materials
ANSI Specified|PROP65: When grinding or regrinding industrial cutting tools, residual grinding dust may occur. This dust may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
| Workpiece material | Suitability | Cutting speed (SFM) |
|---|---|---|
| P — Steel | ||
| Alloy Steels: 4140; 4340 | Best | 15 – 30 |
| Die Steels | Good | 10 – 25 |
| M — Stainless Steel | ||
| Stainless Steels: 17-4PH | Best | 8 – 20 |
| Stainless Steels: 400 | Good | 12 – 45 |
| S — HRSA & Titanium | ||
| Nickel Alloy : Inconel | Good | 8 – 15 |
| Titanium : 6AL4V (30HRC) | Good | 8 – 15 |
| H — Hardened Steel | ||
| Hardened Steels: 35 HRC | Best | 15 – 35 |
| Hardened Steels: 35-45 HRC | Good | 10 – 20 |
Speeds and suitability ratings supplied by OSG for the EXOTAP VC-10 series. Starting values — adjust for your setup, coolant and workholding rigidity.