M10 x 1.25 D5 3FL SEMI-BTM EXO-TAP VC10 TAP
M10 x 1.25 D5 3FL SEMI-BTM EXO-TAP VC10 TAP
OSG1706008
1706008
88.36
/ EA
http://schema.org/OutOfStock
/Product/OSG1706008
- Chamfer: Semi-Bottoming
- Class of Fit: D5
- Hand Direction: Right Hand
- Material: VC-10
- Number of Flutes: 3
- Overall Length Decimal Inch: 2.9375
- Overall Length Fractional Inch: 2-15/16
- Overall Length Metric: 74.612
- Series: 345
- Shank Diameter Decimal Inch: 0.381
- Surface Treatment: V Coated/TiCN Coated
- Thread Length Decimal Inch: 1.25
- Thread Length Fractional Inch: 1-1/4
- Thread Limit: D10
- Thread Size: M10x1.25
- Thread Standard: UNF
- Type: High Performance
- Applicable Materials: Die Steels, Titanium, High Nickel Alloy, Alloy Steels and Hardened Steels
- Flute Direction: Right Hand
- Has Attributes: Yes
- Has Image: Yes
- System of Measurement: Metric
- Application
- Item Features
- Standards
- Recommended Speeds
Aerospace, Medical, Oil and Gas
- Suitable for difficult to machine materials
- Increased hardness for longer life
- Increased hardness, lubricity and wear resistance
- Alloy steels, SS 17-4PH, hardened steel up to 35 HRc
ANSI Specified|PROP65: When grinding or regrinding industrial cutting tools, residual grinding dust may occur. This dust may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
| Workpiece material | Suitability | Cutting speed (SFM) |
|---|---|---|
| P — Steel | ||
| Alloy Steels: 4140; 4340 | Best | 15 – 30 |
| Die Steels | Good | 10 – 25 |
| M — Stainless Steel | ||
| Stainless Steels: 17-4PH | Best | 8 – 20 |
| Stainless Steels: 400 | Good | 12 – 45 |
| S — HRSA & Titanium | ||
| Nickel Alloy : Inconel | Good | 8 – 15 |
| Titanium : 6AL4V (30HRC) | Good | 8 – 15 |
| H — Hardened Steel | ||
| Hardened Steels: 35 HRC | Best | 15 – 35 |
| Hardened Steels: 35-45 HRC | Good | 10 – 20 |
Speeds and suitability ratings supplied by OSG for the EXOTAP VC-10 series. Starting values — adjust for your setup, coolant and workholding rigidity.