M14 x 1.5 6H 3FL 1.5P HYPRO-ALLOY DIN TAP
M14 x 1.5 6H 3FL 1.5P HYPRO-ALLOY DIN TAP
OSG1311301208
1311301208
132.66
/ EA
http://schema.org/OutOfStock
/Product/OSG1311301208
- Chamfer: 1.5P-2P Bottoming
- Class of Fit: 6H
- Hand Direction: Right Hand
- Material: HSSE
- Number of Flutes: 3
- Overall Length Decimal Inch: 100
- Overall Length Metric: 2540
- Series: 13113
- Shank Diameter Decimal Inch: 0.429
- Shank Diameter Metric: 10.89
- Size: M14
- Surface Treatment: V-Coated
- Thread Length Decimal Inch: 0.394
- Thread Length Metric: 10
- Thread Size: M14-1.5
- Through Coolant (Yes/No): Yes
- Type: High Performance
- Applicable Materials: Alloy Steel, Cast Aluminum, Cast Iron, Die Steel, Hardened Steel and High Carbon Steel
- Has Attributes: Yes
- Has Image: Yes
- System of Measurement: Metric
- Standards
- Recommended Speeds
DIN Standard|REACH EU Regulation Article 33 No. 1907/2006|RoHS Directive EU 2015/863|WEEE 2002/96/EC|PROP65: When grinding or regrinding industrial cutting tools, residual grinding dust may occur. This dust may contain chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
| Workpiece material | Suitability | Cutting speed (SFM) |
|---|---|---|
| P — Steel | ||
| Alloy Steels: 4140; 4340 | Best | 45 – 110 |
| Die Steels | Good | 20 – 60 |
| High Carbon Steel: 1065 | Good | 40 – 100 |
| K — Cast Iron | ||
| Cast Iron | Good | 40 – 100 |
| N — Non-Ferrous | ||
| Aluminum: Casting | Good | 50 – 110 |
| H — Hardened Steel | ||
| Hardened Steels: 35 HRC | Good | 20 – 60 |
| Hardened Steels: 35-45 HRC | Good | 15 – 50 |
Speeds and suitability ratings supplied by OSG for the HY-PRO ALLOY series. Starting values — adjust for your setup, coolant and workholding rigidity.