M4-0.7 H7 3SP HYPRO-AERO-F TiN TAP
M4-0.7 H7 3SP HYPRO-AERO-F TiN TAP
OSG1111501705
1111501705
19.92
/ EA
http://schema.org/OutOfStock
/Product/OSG1111501705
- Applicable Materials: Steel, Stainless Steel, Tool Steel, Die Steel and Aluminum
- Chamfer: 4-5P Plug
- Hand Direction: Right Hand
- Material: HSS-Co
- Number of Flutes: 3
- Overall Length Decimal Inch: 54
- Overall Length Metric: 1371.6
- Series: HY-PRO® AERO-F 11115
- Shank Diameter Decimal Inch: 0.168
- Shank Diameter Metric: 4.26
- Surface Treatment: TiN Coated
- Thread Length Decimal Inch: 0.433
- Thread Length Metric: 11
- Thread Limit: H7
- Thread Size: M4x0.7
- Has Attributes: Yes
- Has Image: Yes
- System of Measurement: Metric
- Through Coolant (Yes/No): No
Taps are used to cut screw threads on the inside surfaces of holes, creating the "female" half (nut) of the screw. High precision is of vital importance, particularly in areas such as automobile engines, which require precision screws. OSG offers a lineup of taps with diameters in various sizes and with specifications suitable for a wide variety of uses.
- Application
- Item Features
- Standards
- Recommended Speeds
Aerospace Fasteners and Through Hole Applications
- Spiral point taps push chips forward
- Cobalt HSS material - increased wear-resistance
- TiN coating improves wear-resistance for extended tap life
- DIN overall length provides greater reach capability
- 3X eccentric relief design drastically reduces drag and friction
PROP65: When grinding or regrinding industrial cutting tools, residual grinding dust may occur. This dust may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
| Workpiece material | Suitability | Cutting speed (SFM) |
|---|---|---|
| P — Steel | ||
| High Carbon Steel: 1065 | Best | 20 – 45 |
| Low Carbon Steel: 1010; 1018 | Best | 25 – 80 |
| Medium Carbon Steel: 1035; 1045 | Best | 20 – 50 |
| Alloy Steels: 4140; 4340 | Good | 20 – 50 |
| Die Steels | Good | 15 – 30 |
| M — Stainless Steel | ||
| Stainless Steels: 300 | Best | 20 – 45 |
| Stainless Steels: 400 | Best | 20 – 45 |
| Stainless Steels: 17-4PH | Good | 15 – 20 |
| K — Cast Iron | ||
| Cast Iron | Good | 25 – 75 |
| N — Non-Ferrous | ||
| Aluminum: 6061; 7075 | Good | 40 – 80 |
| Aluminum: Casting | Good | 40 – 65 |
| S — HRSA & Titanium | ||
| Nickel Alloy : Inconel | Good | 8 – 15 |
| Titanium : 6AL4V (30HRC) | Good | 8 – 15 |
| H — Hardened Steel | ||
| Hardened Steels: 35 HRC | Good | 15 – 35 |
Speeds and suitability ratings supplied by OSG for the HY-PRO AERO-F series. Starting values — adjust for your setup, coolant and workholding rigidity.