#630 3.3MM CARB-TIPPED TAPER LENGTH DRILL
#630 3.3MM CARB-TIPPED TAPER LENGTH DRILL
HCT630033
630033
30.20
/ EA
http://schema.org/OutOfStock
/Product/HCT630033
- Cutting Depth: 76 mm
- Drill Size - Decimal Inch: 0.1299 in
- Drill Size - Metric: 3.3 mm
- Flute Length: 76 mm
- Flute Type: Twist
- Material: Carbide, Tool Steel
- Overall Length: 137 mm
- Point Type: Standard
- Series: 630M
- Shank Type: Straight/Tanged
- Type: Material Specific
- Point Angle: 118 deg
- Applicable Materials: Cast Iron and Non-Ferrous Materials
- Has Attributes: Yes
- Has Image: Yes
- Item Features
- Drills are end cutting tools used to produce holes when rapid removal of material is desired
- Twist drills are generally effective in holes up to 3 tool diameters deep - peck cycles should be used for deeper holes to achieve better chip evacuation
- Longer flute and overall lengths than jobbers length drills
- Carbide tip high temperature brazed to hardened tool steel body
- Smooth flutes for effective chip flow
- Precision ground to insure concentricity of tip and body
- The longer length of these drills increases their effective reach through drill bushings
- For use in ASA split sleeve drill drivers