/harvey%20tool%20logo_150x150_72dpi_new.jpg)
.420" 8FL 90DEG BACK DEBURRING END MILL
.420" 8FL 90DEG BACK DEBURRING END MILL
HATL57170-C3
57170-C3
150.05
/ EA
http://schema.org/OutOfStock
/Product/HATL57170-C3
- Angle Per Side: 45°
- Chamfer Center Diameter: 0.3889in
- Chamfer Center Length: 0.116in
- Chamfer Width: 0.0321 in
- Country of Origin: US
- Cutter Head Diameter: 0.42 in
- End Length: 0.1in
- Flat Width: 0.1000 in
- Head Diameter: 0.42in
- Included Angle: 90 deg, 90°
- Length of Cut: 0.0321in
- Manufacturer Name: Harvey Tool
- Material: Solid Carbide
- Neck Diameter: 0.35in
- Neck Length: 3.375in
- Number of Flutes: 10
- Overall Length: 6 in, 6in
- Shank Diameter: 0.4375in, 7/16 in
- Shank Type: Cylindrical
- Surface Treatment: AlTiN, C3
- End Type: Chamfer Threaded
- Hand Direction: Right Hand
- Has Attributes: Yes
- Has Image: Yes
- Application
- Item Features
- Standards
Deburring on backside of small holes and tight pockets
- Slightly undersized to fit in common hole sizes
- Design has smaller radial projection than double angle shank cutters and back chamfer cutters, which results in increased neck diameter and improved strength
- Left hand shear flute / right hand cut evacuates chip away from part
- Applicable Materials are Non-Ferrous Metal, Cast Iron, Steel, Stainless Steel, Composites
- Axial Length Of Cut 0.0321 in
- Neck Diameter 0.3500 in
- Neck Length 3.3750 in (3-3/8)
- Chamfer Center Length 0.1160 in
- Chamfer Center Diameter 0.3889 in
- Profile Back Chamfer
PROP65: This product contains chemicals known to the State of California to cause cancer