683M-4Z INTERNAL CHAMFER GAGES
STR64992
MFG #: 64992
$751.75
/ EA
- Dial Color: Yellow
- Dial Size: 2-19/64 in Dia x 57/64 in H
- Graduations: 0.02 mm
- Material: Hardened Tool Steel
- Measuring Range: 25 to 50 mm
- Plunger Type: 3-Blade
- Series: 683
- Type: Internal
These gages directly measure the diameter of chamfered holes. No setting master is necessary. When the three blade plunger is pressed against a fl at surface, the gage should read the set number stamped on the back of the indicator. In case of wear, the gage may be adjusted to read the proper number. 25 - 50 mm range in case of wear, the gage may be adjusted to read the proper number.
- Item Features
- Standards
- When the three blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator
- No setting master is necessary
- Gages will measure the smallest diameter of any chamfer within the range of angles printed on the dial face of the gage
- Gages are also available with electronic indicators on request
- Deluxe padded case
- All ground surfaces are of hardened tool steel
- Indicators are AGD design
- Gages directly measure the diameter of chamfered holes
- For 0 - 90 deg Dial reading
PROP65: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm