683-1Z INTERNAL CHAMFER GAGES
STR63684
MFG #: 63684
$614.01
/ EA
- Dial Color: White
- Dial Size: 2-19/64 in Dia x 57/64 in H
- Graduations: 0.001 in
- Material: Hardened Tool Steel
- Measuring Range: 0 to 3/8 in
- Plunger Type: 3-Blade
- Series: 683
- Type: Internal
These gages directly measure the diameter of chamfered holes. No setting master is necessary. When the three blade plunger is pressed against a fl at surface, the gage should read the set number stamped on the back of the indicator. In case of wear, the gage may be adjusted to read the proper number. 0 - 3/8 in range in case of wear, the gage may be adjusted to read the proper number.
- Item Features
- Standards
- When the three blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator
- No setting master is necessary
- Internal gages will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face
- Gages are also available with electronic indicators on request
- Deluxe padded case
- All ground surfaces are of hardened tool steel
- Indicators are AGD design
- Gages directly measure the diameter of chamfered holes
- For 0 - 90 deg Dial reading
PROP65: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm