15INX10YD 519Y DIE-CUT

3M™ die-cut sandblast stencil 519Y features a double liner design for optimum support for center of letters, numbers and designs. The translucent yellow inner liner provides heightened visibility of cut designs during positioning and blasting. The white polypropylene liner is more conformable to run through commercial plotters and releases easily to help avoid stretching and distortion of design. Ideal for die-cutting, flatbed and friction fed formats, 3M™ die-cut sandblast stencil 519Y helps protect granite, marble and other stone surfaces during blasting applications. It can be used with most stencil press equipment. It is recommended that this stencil be applied to a warm, clean and dry surface. When the stencil is applied to cold stone surfaces it is possible for condensation to form as the stone warms. Condensation can affect the performance of the stencil's rubber adhesive. To minimize shrinkage, allow rubber backing to relax before applying to the stone. Rub down firmly to adhere stencil to the stone. Use 3M™ sandblast filler #2 to help increase adhesion and hold stencil to polished stone surfaces. Use 3M™ sandblast filler #3 on axed or frosted surfaces if increased adhesion is desired. In our 3M™ industrial adhesives and tapes division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently.