12 3/4INX10YD 510 SANDBLAST

3M™ sandblast stencil - hand-cut splice free 510 is a general purpose sandblast stencil for hand-cut and die-cut operations. The green rubber backing helps prevent stretching and design distortion and offers easy alignment and blast-through. Rubber adhesive delivers a reliable bond to most surfaces and removes cleanly. 3M™ sandblast stencil hand-cut splice free 510 is a green, rubber-backed sandblast stencil with a rubber based adhesive and clear polyester, film high-release liner that ensures ease of use, processing and application. Ideal for die-cutting and hand-cut stenciling. Its rubber tape backing helps prevent stretching and design distortion and offers easy alignment and blast-through. Our sandblast stencil products have the rubber backing thickness necessary to withstand the heavy blasting used to create crisp, deep images in granite, marble and other stone surfaces. The versatile rubber adhesive is excellent for a variety of surfaces yet still removes cleanly from a variety of surfaces in one-piece for faster, easier clean-up 3M™ sandblast stencil - hand-cut splice free 510 is mounted on a clear polyester high-release liner for excellent die-cutting capabilities. This product is used in a variety of application methods including hand-cut, die-cut, flatbed and friction fed. The stone surface should be clean, dry and at a room temperature of 50 deg to 85 deg F (10 deg to 29 deg C) before applying the filler. Brush the well-mixed filler evenly onto the stone surface. Let dry in a well-ventilated area until the "gloss" on the surface has disappeared. Then apply the stencil according to directions. After blasting, remove the stencil as soon as possible. If any cleanup is necessary, use stencil scraps or masking tape to pull leftover filler from the stone. Use 3M™ sandblast filler #2 to help increase adhesion and to hold the stencil to polished stone surfaces. Use 3M™ sandblast filler #3 for rough and irregular surfaces. The 3M™ industrial adhesives and tapes division is changing the way companies around the world mask, protect, splice, color code and stop moisture. These technologies help customers deliver competitive products to the market with speed and efficiency. The 3M™ sandblast stencil - hand-cut splice free 510 is just one example of how 3M™ is bringing better ideas to the surface through science and innovation.