3000 1 LB STD BLK RETRACT DUAL SS CARABINER

The Squids® 3000 Retractable Tool Lanyard with Dual Stainless-Steel Carabiners on both ends is a lightweight and durable tool tethering solution designed to mount to the user 's belt or a separate anchor point. Using a retractable lanyard limits potential snag hazards compared to standard lanyards. This lanyard can tether hand tools weighing up to 1 lb/0.5 kg to prevent falling objects when working at-heights. This retractable lanyard is made with a Technora cord for ultimate strength and durability. The durable ABS plastic housing is textured for better grip and is designed to protect the internal workings of the retractable. This retractable tether measures 48 in/122 cm when fully extended. How to Use - Both ends of this self-retracting lanyard feature a swiveling Squids® manual locking stainless-steel carabiner. The anchoring end should be connected to D-rings or other anchor points. The connecting end of the cord secures to hand tools weighing up to 1 lb/0.5 kg and has a connecting buckle clip to easily exchange multiple tools. Set your working length by pulling the cord out to the desired length and tugging upward to lock the cord in place. Setting a fixed-length alleviates the constant tension on your tool while working. To retract, slightly extend the lanyard out a bit further to release the lock allowing the cord to retract again. Tested and Approved - Tested and qualified to the ANSI/ISEA 121 standard, these retractable safety lanyards have no equal. All tool lanyards are built to withstand defined weight limits and are easy to use by any worker to avoid accidentally dropped objects that could cause unwanted damage, injuries, or possibly death. Safety lanyards are a part of an overall fall protection plan to reduce the risk of falling objects and increase workplace safety. When working at-heights it 's critical to tether tools.