DIXON VALVE & COUPLING

1 1/2 MNPT SHORT SHANK NOTCHED STEM

DIXRST150NOS MFG #: RST150NOS
$38.93 / EA
  • Domestic/Import: Domestic
  • End Style: MNPT
  • Length: 4-3/16 in
  • Material: 316 Stainless Steel
  • Nominal Size: 1-1/2 in
  • Pressure Rating: 250 psi
  • Type: External Swage
QTY
  • Application
  • Item Features
Recommended for use where lower working pressures are encountered, on most one and two wire braid reinforced hoses, fiber reinforced (braided or spiraled) with or without helical wire such as oil and suction discharge hose, barge and dock loading and unloading hose as well as LP gas hose, anhydrous ammonia hose, acid chemical hose, air and water hose
  • For hose outside diameters of 2-4/64 in and below, the couplings are crimp only
  • For hose diameters of 2-5/64 in and above, the couplings can be crimped or swaged
  • Only use the NOS shank with the NOS ferrules
  • Due to differences in dimensions and tolerances, for safety reasons, do not use other manufacturer's stems or ferrules with Dixon Holedall products
  • You must purchase a fitting and the matching ferrule to create an assembly
  • Holedall couplings, regardless of coupling style, are never to be used for steam service at any pressure
  • Holedall fittings are not to be used with cable reinforced high-pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations
  • Externally swaged Holedall couplings, to perform satisfactorily, must be applied properly in accordance with Dixon's assembly procedures, using correct die and ferrule for that particular hose end OD
  • Dixon® die and ferrule recommendation guide is to be used to select correct dies and ferrules
  • Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting
  • The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure
  • Media being transported through the hose should be compatible with the stem material
  • Compatibility of ferrule material with the environment in which it will be used is recommended
  • For applications other than the ones list, please consult Dixon
  • Warning: this product contains a chemical known to the State of California to cause birth defects or other reproductive harm
  • Do not use in connection with drinking water
  • Wash hands after handling