1 1/2 SANITARY END

Flow chief sanitary Fittings are used in the food, dairy and beverage industries, recommended where increased flow capacity is important

• Special plug is required to expand CIP compliant fittings
• Special adapter plate is required to expand 1-1/2"" CIP compliant fittings
• Consult maximum working pressure chart or contact Dixon for additional application and working pressure information
• Flow chief internal expansion (IX) fittings are only to be used with flow chief stainless steel ferrules
• Holedall couplings, regardless of coupling style, are never to be used for steam service at any pressure
• Holedall fittings are not to be used with cable reinforced high pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations
• Strict adherences to ferrule OD range (internally expanded) for each hose end to be assembled is essential for satisfactory performance
• Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting
• The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure
• Media being transported through the hose should be compatible with the stem material
• Compatibility of ferrule material with the environment in which it will be used is recommended
• For applications other than the ones list, please consult Dixon
• Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
• Do not use in connection with drinking water
• Wash hands after handling