3/16 (.1875) HSS HAND TAPER PIN REAMER
3/16 (.1875) HSS HAND TAPER PIN REAMER
DOR5986395
5986395
66.81
/ EA
http://schema.org/OutOfStock
/Product/DOR5986395
- Flute Length: 70mm
- Flute Type: Straight
- Hand Direction: Right Hand
- Material: HSS
- Number of Flutes: 4
- Overall Length: 102mm
- Reamer Diameter: 4.76mm
- Series: B301
- Shank Diameter: 4.95mm
- Shank Type: Square
- Small End Diameter: 3.5mm
- Surface Treatment: Bright/Steam Oxide
- Taper Pin Size/Number: 3/16in
- Type: Conical Square Drive
- Has Attributes: Yes
- Has Image: Yes
- Application
- Item Features
- Standards
For reaming holes without interrupted cuts such as keyways and cross sections
- Straight flute reamers are the most common and used in general purpose though-hole applications
- Designed to convert a straight hole into a tapered hole into which standard taper pins will fit
- The square on the shank is suitable for holding a tap wrench or vise, depending on whether the reamer or part is rotating, making them ideal for hand use
- Steam tempering gives a strongly adhering blue oxide surface that acts to retain cutting fluid and prevent chip to tool welding, thereby counteracting the formation of a built-up edge
- Steam tempering can be applied to any bright tool but is most effective on drills and taps
- +0.0050 tolerance
BS328