2x1/4-20 CRS Surface Conditioning Star

Our standard Abrasives™ surface conditioning star has six spindles with a center eyelet. Made with non-woven technology, the spindles have the flexibility to fit into tubing, piping and other hard to reach areas and the conformability to deburr or clean irregular surfaces without changing the geometry of the piece. The spindles also allow the operator to view the work surface during use. Ideal for light deburring and blending applications where final finish is important, the Standard Abrasives™ surface conditioning star delivers a fast cut and consistent finish in a single step. The non-woven nylon material is both durable and load-resistant, meaning the star can used again and again. The heat-resistant open web makes this an excellent choice for use on aluminum, stainless steel and titanium. The Standard Abrasives™ surface conditioning star has a 1/4-20 threaded eyelet arbor hole and is used with a standard Abrasives™ TM-4 mandrel 707605 (sold separately) with a 3 in shank, 1/4 in shank diameter and thread size of 1/4-20. The mandrel enables attachment to a die grinder and enables safe use at high speeds. Low pressure application produce optimal results when used at suggested speeds. Three grades are available: coarse (CRS), medium (MED) and very fine (VFN), with the CRS abrasive producing a larger, more aggressive scratch pattern and the VFN a soft, finer scratch pattern. The Standard Abrasives™ brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded and non-woven abrasive lines.