572-600SD-10G, 100mm, IP-66

For machine table positioning, drilling machine stroke position, tool presetting and focus setting on optical instruments

• The ORIGIN key allows setting of an absolute zero point to be used as reference in subsequent measurements - once set, the abs digimatic scale unit is ready to show its true position whenever turned on rather than 0.00 in as with standard models
• The zero/ABS key allows the display to be zero set at any slider position along the beam for incremental comparison measurements
• This key will also allow return to the absolute coordinate with a display of the true position from the origin point
• No rack, no pinion, no glass scale
• Digimatic scale unit is safely embedded in the hardened stainless steel blade
• Horizontal or vertical face according to the scale mounting direction
• All units come with two mounting brackets, each located at either end of the scale
• Special type that is provided with diameter displaying function is available for lathes
• Absolute scale technology prevents overspeed errors
• The coordinate origin (ABS point) can be set to desired position and stored - A previously set ABS point is retained even when the power is off, so the current true position is displayed immediately after power on
• Small and light
• Long battery life
• SPC data output
• Featuring absolute scale technology with a new detection method, that makes the unit usable in hostile environments where it is exposed to water or coolant spray
• IP66 rated