3M™ FIRE BARRIER SEALANT CP 25WB+, RED, 10.1 FL OZ CARTRIDGE, 12/CASE

3MA7000006383 MFG #: 7000006383
$14.05 / EA
  • Base Type: Latex
  • Color: Red
  • Composition: Sodium Silicate, Water, Zinc Borate 2335, Polymer, Ethylhexyldiphenyl Phosphate, Iron Oxide, Oxide Glass Chemicals, Polyethylene Glycol, Quartz Silica
  • Container Size: 10.1 fl-oz
  • Container Type: Cartridge
  • Coverage: 29 linear ft
  • Curing Time: 72 hr
  • Drying Time: 45 min
  • Fire Rating: 4 hr
  • Flammability Rating: 1
  • Form: Paste
  • pH Range: 7.5 to 8
  • Series: CP 25WB+
  • Specific Gravity: 1.35
  • Temperature Rating: 4 to 50 deg C
  • Tensile Strength: 85 psi
  • Type: High Performance
  • Viscosity Rating: 12000 cPs
  • VOC Content: <=6 g/L
Dependable and easy to use firestop sealant tough and ready-to-use, 3M™ fire barrier sealant CP 25WB+ is a high-performance, one component, latex based, intumescent sealant that dries to form a monolithic firestop seal. This sealant also acts as a barrier to airborne sound transmission. As penetrants are exposed to fire, the unique intumescent property of this material allows 3M™ fire barrier sealant CP 25WB+ to expand and help maintain a firestop penetration seal for up to 4 hours. This sealant is designed to help control the spread of fire, smoke and noxious gases before, during and after exposure to a fire when installed in accordance with a listed through-penetration or fire-resistive joint assembly system (STC-Rating of 54 when tested in a STC 54-rated wall assembly). Recommended applications HVAC ducts and vents metallic and non-metallic pipes blank openings single and bundled cables insulated pipe and cable through-penetrations busways combos rated wall, floor and floor ceiling assemblies static construction joints ready to protect for consistent results 3M™ fire barrier sealant CP 25WB+ firestops blank openings and penetrations passing through fire-rated floor, floor/ceiling or wall assemblies and other fire-rated interior building construction. This halogen-free sealant is capable of expanding a minimum of 3 times its dried volume when exposed to temperatures above 1000 deg f (538 deg C). We engineered this sag-resistant sealant to exhibit strong adhesion to a full range of construction substrates and penetrants. Applied with conventional caulking equipment, this gun grade sealant offers an excellent caulk rate, no mixing is required. In addition, this water based sealant is paintable as well as re-enterable and repairable, offering easy application and clean-up. Reliable and affordable fire protection effective and easy to install, 3M™ fire barrier sealant CP 25WB+ is part of 3M™ family of fire protection products that offer the broadest, long-lasting solutions for a variety of commercial, industrial and residential applications. As a trusted leader in the fire protection industry, 3M™ offers a broad line of affordable products designed to meet the most demanding firestop requirements. Find the solution you need from the industry preferred line of fire protection products.
QTY
  • Application
  • Item Features
  • Standards
HVAC Ducts and Vents, Metallic and Non-Metallic Pipes, Blank Openings, Single and Bundled Cables, Insulated Pipe, Pipe and Cable Through Penetrations, Busways, Combos, Rated Wall, Floor and Floor-Ceiling Assemblies and Static Construction Joints Applications
  • Applied with conventional caulking equipment with excellent caulk rate
  • Sag-resistant properties offer clean application as well as strong adhesion
  • Water based and paintable sealant provides easy application and cleanup
  • Re-enterable/repairable
  • Helps minimize sound transfer
  • Halogen-free and paintable
ASTM E814|UL 1479|CAN/ULC S115|ASTM E1966|UL 2079|ASTM E814|UL 1479|IBC Certified|IRC Certified|IFC Certified|IPC Certified|IMC Certified|NFPA 5000|NEC Certified|NFPA 70|NFPA 101