M8 x 1.25 6H 3SP PLUG HY-PRO DIN SO TAP
M8 x 1.25 6H 3SP PLUG HY-PRO DIN SO TAP
OSG2591401
2591401
23.55
/ EA
http://schema.org/OutOfStock
/Product/OSG2591401
- Applicable Materials: Steel, Stainless Steel, Tool Steel, Die Steel and Nickel Alloys
- Chamfer: 3.5P-4.5P Plug
- Class of Fit: 6H
- Hand Direction: Right Hand
- Material: HSS-E
- Number of Flutes: 3
- Overall Length Decimal Inch: 90
- Overall Length Metric: 2286
- Series: HY-PRO® DIN 259
- Shank Diameter Decimal Inch: 0.318
- Shank Diameter Metric: 8.07
- Surface Treatment: Steam Oxide
- Thread Length Decimal Inch: 0.591
- Thread Length Metric: 15
- Thread Size: M10x1.25
- Type: Performance
- Has Attributes: Yes
- Has Image: Yes
- System of Measurement: Metric
- Through Coolant (Yes/No): No
Taps are used to cut screw threads on the inside surfaces of holes, creating the "female" half (nut) of the screw. High precision is of vital importance, particularly in areas such as automobile engines, which require precision screws. OSG offers a lineup of taps with diameters in various sizes and with specifications suitable for a wide variety of uses.
- Application
- Item Features
- Standards
- Recommended Speeds
Through Hole Applications
- Spiral point taps push chips forward
- HSS-E material increased wear-resistance
- Steam oxide surface treatment increases mechanical lubricity
- DIN overall length provides greater reach capability
PROP65: When grinding or regrinding industrial cutting tools, residual grinding dust may occur. This dust may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
| Workpiece material | Suitability | Cutting speed (SFM) |
|---|---|---|
| P — Steel | ||
| Alloy Steels: 4140; 4340 | Best | 20 – 50 |
| High Carbon Steel: 1065 | Best | 20 – 45 |
| Die Steels | Good | 15 – 30 |
| Low Carbon Steel: 1010; 1018 | Good | 25 – 80 |
| Medium Carbon Steel: 1035; 1045 | Good | 20 – 50 |
| M — Stainless Steel | ||
| Stainless Steels: 17-4PH | Good | 15 – 20 |
| Stainless Steels: 300 | Good | 20 – 45 |
| Stainless Steels: 400 | Good | 20 – 40 |
| K — Cast Iron | ||
| Cast Iron | Good | 25 – 75 |
| H — Hardened Steel | ||
| Hardened Steels: 35 HRC | Good | 15 – 35 |
Speeds and suitability ratings supplied by OSG for the HY-PRO POT series. Starting values — adjust for your setup, coolant and workholding rigidity.