M10 x 1.5 STI D4 3RX EXO-TAP VC10 V TAP
M10 x 1.5 STI D4 3RX EXO-TAP VC10 V TAP
OSG34500808
34500808
102.11
/ EA
http://schema.org/OutOfStock
/Product/OSG34500808
- Chamfer: 2.5P-3P Modified Bottoming
- Material: VC-10
- Number of Flutes: 3
- Overall Length Decimal Inch: 85
- Overall Length Metric: 2159
- Series: 345STI
- Shank Diameter Decimal Inch: 0.367
- Shank Diameter Metric: 9.32
- Square Size Metric: 11.1mm L x 6.98mm W
- Surface Treatment: V-Coated
- Thread Length Decimal Inch: 0.591
- Thread Length Metric: 15
- Thread Size: M10
- Type: 15° Helix High Performance
- Has Attributes: Yes
- Has Image: Yes
- System of Measurement: Metric
EXOTAP® VC-10® taps STI high performance spiral flute tap for difficult to machine materials.
- Application
- Item Features
- Standards
- Recommended Speeds
For difficult to machine materials applications
- Without through coolant
REACH EU Regulation Article 33 No. 1907/2006|RoHS Directive EU 2015/863|WEEE 2002/96/EC|PROP65: When grinding or regrinding industrial cutting tools, residual grinding dust may occur. This dust may contain chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
| Workpiece material | Suitability | Cutting speed (SFM) |
|---|---|---|
| P — Steel | ||
| Alloy Steels: 4140; 4340 | Best | 15 – 30 |
| Die Steels | Good | 10 – 25 |
| M — Stainless Steel | ||
| Stainless Steels: 17-4PH | Best | 8 – 20 |
| Stainless Steels: 400 | Good | 12 – 45 |
| S — HRSA & Titanium | ||
| Nickel Alloy : Inconel | Good | 8 – 15 |
| Titanium : 6AL4V (30HRC) | Good | 8 – 15 |
| H — Hardened Steel | ||
| Hardened Steels: 35 HRC | Best | 15 – 35 |
| Hardened Steels: 35-45 HRC | Good | 10 – 20 |
Speeds and suitability ratings supplied by OSG for the EXOTAP VC-10 series. Starting values — adjust for your setup, coolant and workholding rigidity.