/harvey%20tool%20logo_150x150_72dpi_new.jpg)
.210" DIA x 90DEG BACK CHAMFER END MILL
.210" DIA x 90DEG BACK CHAMFER END MILL
HATL943440
943440
100.70
/ EA
http://schema.org/OutOfStock
/Product/HATL943440
- Angle Per Side: 45, 45°
- Chamfer Width: 0.037 in
- Country of Origin: US
- Cutter Head Diameter: 0.21 in
- Included Angle: 90, 90 deg, 90°
- Manufacturer Name: Harvey Tool
- Material: Solid Carbide
- Number of Flutes: 5
- Overall Length: 2.5in, 2-1/2 in, 2-1/2in
- Shank Diameter: 0.25in, 1/4 in, 1/4in
- Shank Type: Cylindrical
- Head Diameter: 0.21in
- Length of Cut: 0.037in
- End Type: Chamfer Threaded
- Hand Direction: Right Hand
- Has Attributes: Yes
- Has Image: Yes
- Neck Diameter: 0.13in
- Neck Length: 0.375in, 3/8in
- Reach Multiple: (3x)
- Surface Treatment: Un, UNCOATED
- System of Measurement: Imperial
- Application
- Item Features
- Standards
Generating Chamfered features on the backside of small holes or slots
- Low profile design and greater radial projection ideal for generating chamfered features on the backside of small holes or slots
- Decrease costs by avoiding time-consuming changes to part set-ups
- Slightly undersized to fit in common hole sizes
- Applicable Materials are Aluminum, Cast Iron, Steel, Stainless Steel, Wood, Composites
- Axial Length Of Cut 0.0370 in
- Neck Diameter 0.1300 in
- Neck Length 0.3750 in (3/8)
- Profile Back Chamfer
PROP65: This product contains chemicals known to the State of California to cause cancer