.028" 3FL 45DEG CARBIDE BACK DUBURRING MILL

.028" 3FL 45DEG CARBIDE BACK DUBURRING MILL

HATL65728-C3 65728-C3
85.20 / EA
http://schema.org/OutOfStock
.028 x45Deg BACK DEBURR AlTiN
  • Angle Per Side: 45°
  • Chamfer Center Diameter: 0.0261in
  • Chamfer Center Length: 0.0215in
  • Chamfer Width: 0.0029 in
  • Country of Origin: US
  • Cutter Head Diameter: 0.028 in
  • End Length: 0.02in
  • Flat Width: 0.0200 in
  • Head Diameter: 0.028in
  • Included Angle: 90 deg, 90°
  • Length of Cut Decimal Inch: 0.0029
  • Length of Cut Metric: 0.074
  • Manufacturer Name: Harvey Tool
  • Material: Solid Carbide
  • Neck Diameter: 0.021in
  • Neck Length: 0.125in
  • Number of Flutes: 3
  • Overall Length Decimal Inch: 2
  • Overall Length Fractional Inch: 2
  • Overall Length Metric: 50.8
  • Shank Diameter Decimal Inch: 0.125
  • Shank Diameter Fractional Inch: 1/8
  • Shank Type: Cylindrical
  • Surface Treatment: AlTiN, C3
  • End Type: Chamfer Threaded
  • Hand Direction: Right Hand
  • Has Attributes: Yes
  • Has Image: Yes
QTY
Add to List
  • Application
  • Item Features
  • Standards
Deburring on backside of small holes and tight pockets
  • Slightly undersized to fit in common hole sizes
  • Design has smaller radial projection than double angle shank cutters and back chamfer cutters, which results in increased neck diameter and improved strength
  • Left hand shear flute / right hand cut evacuates chip away from part
  • Applicable Materials are Non-Ferrous Metal, Cast Iron, Steel, Stainless Steel, Composites
  • Axial Length Of Cut 0.0029 in
  • Neck Length 0.1250 in (1/8)
  • Chamfer Center Length 0.0215 in
PROP65: This product contains chemicals known to the State of California to cause cancer