.315" 8FL 90DEG BACK DEBURRING END MILL

.315" 8FL 90DEG BACK DEBURRING END MILL

HATL57160-C3 57160-C3
115.85 / EA
http://schema.org/OutOfStock
.315 8FL CARB BACK DEBURRING MILL
  • Angle Per Side: 45°
  • Chamfer Center Diameter: 0.2909in
  • Chamfer Center Length: 0.0925in
  • Chamfer Width: 0.0251 in
  • Country of Origin: US
  • Cutter Head Diameter: 0.315 in
  • End Length: 0.08in
  • Flat Width: 0.0800 in
  • Head Diameter: 0.315in
  • Included Angle: 90 deg, 90°
  • Length of Cut: 0.0251in
  • Manufacturer Name: Harvey Tool
  • Material: Solid Carbide
  • Neck Diameter: 0.259in
  • Neck Length: 2.5in
  • Number of Flutes: 8
  • Overall Length: 4 in, 4in
  • Shank Diameter: 0.375in, 3/8 in
  • Shank Type: Cylindrical
  • Surface Treatment: AlTiN, C3
  • End Type: Chamfer Threaded
  • Hand Direction: Right Hand
  • Has Attributes: Yes
  • Has Image: Yes
QTY
Add to List
  • Application
  • Item Features
  • Standards
Deburring on backside of small holes and tight pockets
  • Slightly undersized to fit in common hole sizes
  • Design has smaller radial projection than double angle shank cutters and back chamfer cutters, which results in increased neck diameter and improved strength
  • Left hand shear flute / right hand cut evacuates chip away from part
  • Applicable Materials are Non-Ferrous Metal, Cast Iron, Steel, Stainless Steel, Composites
  • Axial Length Of Cut 0.0251 in
  • Neck Length 2.5000 in (2-1/2)
  • Chamfer Center Diameter 0.2909 in
PROP65: This product contains chemicals known to the State of California to cause cancer