1/4" SER Z5C 5FL Z-CARB HPR END MILL .030R

1/4" SER Z5C 5FL Z-CARB HPR END MILL .030R

SGS38528 38528
54.38 / EA
http://schema.org/OutOfStock
1/4" 5FL SER Z5CR Z-CARB HPR END MILL .030R
  • Type: High Performance Imperial
  • Cutter Diameter Decimal Inch: 0.25
  • Cutter Diameter Fractional Inch: 1/4
  • Cutter Diameter Metric: 6.35
  • Corner Radius: 0.03in
  • Number of Flutes: 5
  • Length of Cut Decimal Inch: 0.375
  • Length of Cut Fractional Inch: 3/8
  • Length of Cut Metric: 9.525
  • Overall Length Decimal Inch: 2.5
  • Overall Length Fractional Inch: 2-1/2
  • Overall Length Metric: 63.5
  • Material: Carbide
  • Surface Treatment: AlTiN Coated
  • Helix Angle: 37°
  • Shank Diameter Decimal Inch: 0.25
  • Shank Diameter Fractional Inch: 1/4
  • Series: Z-Carb-HPR Z5CR
  • Shank Type: Straight
  • Flute Type: Spiral
  • Hand Direction: Right Hand
  • Has Attributes: Yes
  • Has Image: Yes
QTY
Add to List
  • Item Features
  • Standards
  • An ideal balance of helix, indexing, flute depth, rake and relief
  • Variable indexing for chatter suppression and proprietary edge geometry for shearing and strength
  • Chatter-free geometry allows deep cutting and high speed machining
  • Central coolant hole delivers coolant effectively to the cutting zone enhancing chip removal when pocketing or slotting
  • Enhanced corner geometry with tight tolerance corner radii
  • Excels at roughing, ramping, high speed machining and finishing in a variety of materials
  • Recommended for materials <= 45 HRc (<= 420 Bhn)
PROP65: This product can expose you to chemicals including cobalt, which is known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov