/sgs_150x150.jpg?width=150&height=150)
1/2" 5FL SER Z5CR Z-CARB HPR END MILL .090R
1/2" 5FL SER Z5CR Z-CARB HPR END MILL .090R
SGS37359
37359
218.88
/ EA
http://schema.org/OutOfStock
/Product/SGS37359
- Type: High Performance Imperial
- Cutter Diameter Decimal Inch: 0.5
- Cutter Diameter Fractional Inch: 1/2
- Cutter Diameter Metric: 12.7
- Corner Radius: 0.09in
- Number of Flutes: 5
- Length of Cut Decimal Inch: 1.25
- Length of Cut Fractional Inch: 1-1/4
- Length of Cut Metric: 31.75
- Overall Length Decimal Inch: 3.25
- Overall Length Fractional Inch: 3-1/4
- Overall Length Metric: 82.55
- Material: Carbide
- Surface Treatment: AlTiN Coated
- Helix Angle: 37°
- Shank Diameter Decimal Inch: 0.5
- Shank Diameter Fractional Inch: 1/2
- Series: Z-Carb™-HPR Z5CR
- Shank Type: Straight
- Flute Type: Spiral
- Hand Direction: Right Hand
- Has Attributes: Yes
- Has Image: Yes
- Item Features
- Standards
- An ideal balance of helix, indexing, flute depth, rake and relief
- Variable indexing for chatter suppression and proprietary edge geometry for shearing and strength
- Chatter free geometry allows deep cutting and high speed machining
- Central coolant hole delivers coolant effectively to the cutting zone enhancing chip removal when pocketing or slotting
- Enhanced corner geometry with tight tolerance corner radii
- Excels at roughing, ramping, high speed machining and finishing in a variety of materials
- Recommended for materials <= 45 HRc (<= 420 Bhn)
- Suitable for steel, stainless steel, cast iron, high temperature alloy, titanium alloy and hardened steel
PROP65: This product can expose you to chemicals including cobalt, which is known to the State of California to cause cancer.