TCGT 21.50.5L-SI:T8315 TURNING INSERT - POSITIVE
TCGT 21.50.5L-SI:T8315 TURNING INSERT - POSITIVE
PRA6922732
6922732
12.95
/ EA
http://schema.org/OutOfStock
/Product/PRA6922732
- Applicable Materials: Hardened Steel, Cast Iron, Stainless Steel, Aluminum, Steel and Titanium/Super Alloys
- Chipbreaker: SI
- Corner Radius: 0.2mm
- Hand Direction: Left Hand
- Hole Diameter: 2.8mm
- Included Angle: 60°
- Inscribed Circle: 6.35mm
- Insert Size: 21.50.5
- Insert Style: TCGT
- ISO Code: TCGT 110202EL-SI T8315
- Material: Carbide
- Material Grade: H, K, M, N, P, S
- Maximum Depth of Cut Decimal Inch: 0.063
- Maximum Depth of Cut Metric: 1.6
- Rake: Positive
- Relief Angle: 7°
- Seat Size: 11
- Shape: Triangular
- Surface Treatment: CVD Coated
- Thickness: 3/32in
- Type: 11mm
- ANSI Code: TCGT 21.50.5L-SI T8315
- Country of Origin: CZ
- Has Attributes: Yes
- Has Image: Yes
- Manufacturer Grade: T8315
- Manufacturer Name: Dormer Pramet
Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 6.35mm, 2.38mm thick, 0.2mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SI with rounded cutting edges, in grade T8315, a PVD coated fine grained WC-Co carbide within ISO range M05-M20, for fine to medium machining of stainless-steels with a left handed turning tool
- Item Features
- Standards
- T8315 grade highly abrasion resistant material of the T8300 series with guaranteed strength
- Sub-micron substrate with a relatively low cobalt content
- Nano-layered PVD coating with gradient transitions
- Lower internal coating tension with higher hardness
- Lower notch wear on the main cutting edge
- High cutting speeds
- Medium chip cross sections
- Stable machining conditions
- Rounded edge
PROP65: This product contains chemicals known to the State of California to cause cancer. For more information: www.P65Warnings.ca.gov