CCGT 32.51L-SI:T8315 TURNING INSERT - POSITIVE
CCGT 32.51L-SI:T8315 TURNING INSERT - POSITIVE
PRA6922720
6922720
11.58
/ EA
http://schema.org/OutOfStock
/Product/PRA6922720
- Applicable Materials: Aluminum, Cast Iron, Hardened Steel, Stainless Steel, Steel and Titanium/Super Alloys
- Chipbreaker: SI
- Corner Radius: 0.4mm
- Hand Direction: Left Hand
- Hole Diameter: 4.4mm
- Included Angle: 80°
- Inscribed Circle: 9.525mm
- Insert Size: 32.51
- Insert Style: CCGT
- ISO Code: CCGT 09T304EL-SI:T8315
- Material: Carbide
- Material Grade: H, K, M, N, P, S
- Maximum Depth of Cut: 2mm
- Rake: Positive
- Relief Angle: 7°
- Seat Size: 9
- Shape: Diamond
- Surface Treatment: PVD Coated
- Thickness: 3.97mm
- Type: 9.7mm
- Manufacturer Grade: T8315
- ANSI Code: CCGT 32.51L-SI:T8315
- Country of Origin: CZ
- Has Attributes: Yes
- Has Image: Yes
- Manufacturer Name: Dormer Pramet
Single-sided positive turning insert, 80° rhomboid with 7° clearance, inscribed circle diameter of 9.525mm, 3.97mm thick, 0.4mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SI with rounded cutting edges, in grade T8315, a PVD coated fine grained WC-Co carbide within ISO range M05-M20, for fine to medium machining of stainless-steels with a left handed turning tool
- Application
- Item Features
- Standards
Fine Finishing and Semi-Roughing
- T8315 grade highly abrasion resistant material of the T8300 series with guaranteed strength
- Sub-micron substrate with a relatively low cobalt content
- Nano-layered PVD coating with gradient transitions
- Lower internal coating tension with higher hardness
- Lower notch wear on the main cutting edge
- Higher cutting speeds
- Medium chip cross sections
- Stable machining conditions
PROP65: This product contains chemicals known to the State of California to cause cancer. For more information: www.P65Warnings.ca.gov