SNMG 432-NF:HF7 TURNING INSERT - NEGATIVE
SNMG 432-NF:HF7 TURNING INSERT - NEGATIVE
PRA6834698
6834698
8.36
/ EA
http://schema.org/OutOfStock
/Product/PRA6834698
- Applicable Materials: Stainless Steel, Titanium and Super Alloys, Cast Iron, Aluminum and Hardened Steel
- Chipbreaker: NF
- Corner Radius: 0.8mm
- Hole Diameter: 0.203in
- Included Angle: 90°
- Inscribed Circle: 1/2in
- Insert Size: 432
- Insert Style: SNMG
- ISO Code: SNMG 120408E-NF:HF7
- Material: Carbide
- Material Grade: H, K, M, N, S
- Maximum Depth of Cut Decimal Inch: 0.138
- Maximum Depth of Cut Metric: 3.5
- Rake: Negative
- Relief Angle: 0°
- Seat Size: 12
- Shape: Squared
- Surface Treatment: PCD Coated
- Thickness: 3/16in
- Type: 1/2in
- ANSI Code: SNMG 432-NF:HF7
- Has Attributes: Yes
- Has Image: Yes
- Manufacturer Grade: HF7
- Width: 1/2in
Double-sided negative turning insert, square with inscribed circle diameter of 12.7mm, 4.76mm thick, 0.8mm nose radius, indexing accuracy according to ISO-tolerance class-M, chip-breaker NF with rounded cutting edges, in grade HF7, an uncoated fine grained WC-Co carbide, for fine to medium machining
- Item Features
- Standards
- HF7 grade sub-micron material without cubic carbides (type H) and with a low cobalt content
- Very versatile in terms of machined materials
- Small to medium chip cross sections
- Suited to stable machining conditions
- NF chipbreaker - sharp and positive chipbreaker specially designed for stainless steel
- Excellent chip formation ability
- Low cutting forces increase suitability in unstable machine set-ups
- High productivity
- High durability and reliability as a result of combination materials
PROP65: This product contains chemicals known to the State of California to cause cancer. For more information: www.P65Warnings.ca.gov