SNMA 866S:T5305 TURNING INSERT - NEGATIVE
SNMA 866S:T5305 TURNING INSERT - NEGATIVE
PRA6755866
6755866
49.30
/ EA
http://schema.org/OutOfStock
/Product/PRA6755866
- Applicable Materials: Steel, Cast Iron and Hardened Steel
- Corner Radius: 2.4mm
- Included Angle: 90°
- Inscribed Circle: 25.4mm
- Insert Size: 866
- Insert Style: SNMA
- ISO Code: SNMA 250924S:T5305
- Material: Carbide
- Material Grade: H, K, P
- Maximum Depth of Cut Decimal Inch: 0.472
- Maximum Depth of Cut Metric: 12.0
- Rake: Negative
- Relief Angle: 0°
- Seat Size: 25
- Shape: Squared
- Surface Treatment: CVD Coated
- Thickness: 9.52mm
- Type: 25.4mm
- ANSI Code: SNMA 866S:T5305
- Has Attributes: Yes
- Has Image: Yes
- Manufacturer Grade: T5305
- Width: 25.4mm
Double-sided negative turning insert, square with inscribed circle diameter of 25.4mm, 9.52mm thick, 2.4mm nose radius, indexing accuracy according to ISO-tolerance class-M with rounded cutting edges with facet, in grade T5305, a MT-CVD coated WC-Co carbide within ISO range K01-K15, for medium to extra heavy machining of cast-irons
- Item Features
- Standards
- T5305 grade fine grained substrate with a low cobalt content
- Thick layer of MT-CVD coating with a layer of Al2O3 on the surface
- Special finish for coating
- Top performance for machining gray cast iron
- Material with the highest abrasion resistance of the 5300 series
- High cutting speeds
- Continuous and slightly interrupted cut
PROP65: This product contains chemicals known to the State of California to cause cancer. For more information: www.P65Warnings.ca.gov