CNMG 642-RM:T5305 TURNING INSERT - NEGATIVE
CNMG 642-RM:T5305 TURNING INSERT - NEGATIVE
PRA6755810
6755810
21.89
/ EA
http://schema.org/OutOfStock
/Product/PRA6755810
- Applicable Materials: Hardened Steel, Cast Iron and Steel
- Chipbreaker: RM
- Corner Radius: 0.8mm
- Hole Diameter: 7.94mm
- Included Angle: 80°
- Inscribed Circle: 19.05mm
- Insert Size: 642
- Insert Style: CNMG
- ISO Code: CNMG 190608E-RM:T5305
- Material: Carbide
- Material Grade: H, K, P
- Maximum Depth of Cut Decimal Inch: 0.394
- Maximum Depth of Cut Metric: 10.0
- Rake: Negative
- Relief Angle: 0°
- Seat Size: 19
- Shape: Diamond
- Surface Treatment: MT-CVD-Al2O3 Coated
- Thickness: 6.35mm
- Type: 19.3mm
- ANSI Code: CNMG 642-RM:T5305
- Has Attributes: Yes
- Has Image: Yes
- Manufacturer Grade: T5305
Double-sided negative turning insert, 80° rhomboid with inscribed circle diameter of 19.05mm, 6.35mm thick, 0.8mm nose radius, indexing accuracy according to ISO-tolerance class-M, chip-breaker RM with rounded cutting edges, in grade T5305, a MT-CVD coated WC-Co carbide within ISO range K01-K15, for medium to heavy machining of cast-irons
- Application
- Item Features
- Standards
Semi-Roughing and Roughing
- T5305 grade fine grained substrate with a low cobalt content
- Thick layer of MT-CVD coating with a layer of Al2O3 on the surface
- Special finish for coating
- Top performance for machining gray cast iron
- Material with the highest abrasion resistance of the 5300 series
- High cutting speeds
- Continuous and slightly interrupted cut
PROP65: This product contains chemicals known to the State of California to cause cancer. For more information: www.P65Warnings.ca.gov