CNMG 432-M:T5305 TURNING INSERT - NEGATIVE
CNMG 432-M:T5305 TURNING INSERT - NEGATIVE
PRA6755742
6755742
101.45
/ PK (10)
http://schema.org/OutOfStock
/Product/PRA6755742
- Applicable Materials: Hardened Steel, Cast Iron and Steel
- Chipbreaker: M
- Corner Radius: 0.8mm
- Hole Diameter: 5.16mm
- Included Angle: 80°
- Inscribed Circle: 12.7mm
- Insert Size: 432
- Insert Style: CNMG
- ISO Code: CNMG 120408E-M:T5305
- Material: Carbide
- Material Grade: H, K, P
- Maximum Depth of Cut Decimal Inch: 0.236
- Maximum Depth of Cut Metric: 6.0
- Rake: Negative
- Relief Angle: 0°
- Seat Size: 12
- Shape: Diamond
- Surface Treatment: MT-CVD-Al2O3 Coated
- Thickness: 4.76mm
- Type: 12.9mm
- ANSI Code: CNMG 432-M:T5305
- Has Attributes: Yes
- Has Image: Yes
- Manufacturer Grade: T5305
Double-sided negative turning insert, 80° rhomboid with inscribed circle diameter of 12.7mm, 4.76mm thick, 0.8mm nose radius, indexing accuracy according to ISO-tolerance class-M, chip-breaker M with rounded cutting edges, in grade T5305, a MT-CVD coated WC-Co carbide within ISO range K01-K15, for fine to heavy machining of cast-irons
- Application
- Item Features
- Standards
Finishing and Semi-Roughing
- T5305 grade fine grained substrate with a low cobalt content
- Thick layer of MT-CVD coating with a layer of Al2O3 on the surface
- Special finish for coating
- Top performance for machining gray cast iron
- Material with the highest abrasion resistance of the 5300 series
- High cutting speeds
- Continuous and slightly interrupted cut
PROP65: This product contains chemicals known to the State of California to cause cancer. For more information: www.P65Warnings.ca.gov