CNMA 644:T5305 TURNING INSERT - NEGATIVE
CNMA 644:T5305 TURNING INSERT - NEGATIVE
PRA6755740
6755740
218.88
/ PK (10)
http://schema.org/OutOfStock
/Product/PRA6755740
- Applicable Materials: Hardened Steel, Cast Iron and Steel
- Corner Radius: 1/16in
- Hole Diameter: 0.313in
- Included Angle: 80°
- Inscribed Circle: 3/4in
- Insert Size: 644
- Insert Style: CNMA
- ISO Code: CNMA 190616:T5305
- Material: Carbide
- Material Grade: H, K, P
- Maximum Depth of Cut Decimal Inch: 0.5
- Maximum Depth of Cut Fractional Inch: 1/2
- Rake: Negative
- Relief Angle: 0°
- Seat Size: 19
- Shape: Diamond
- Surface Treatment: MT-CVD-Al2O3 Coated
- Thickness: 1/4in
- Type: 0.76in
- ANSI Code: CNMA 644:T5305
- Country of Origin: CZ
- Has Attributes: Yes
- Has Image: Yes
- Manufacturer Grade: T5305
- Manufacturer Name: Dormer Pramet
Double-sided negative turning insert, 80° rhomboid with inscribed circle diameter of 19.05mm, 6.35mm thick, 1.6mm nose radius and indexing accuracy according to ISO-tolerance class-M, in grade T5305, a MT-CVD coated WC-Co carbide within ISO range K01-K15, for fine to heavy machining of cast-irons
- Application
- Item Features
- Standards
Fine Finishing, Finishing and Semi-Roughing
- T5305 grade fine grained substrate with a low cobalt content
- Thick layer of MT-CVD coating with a layer of Al2O3 on the surface
- Special finish for coating
- Top performance for machining gray cast iron
- Material with the highest abrasion resistance of the 5300 series
- High cutting speeds
- Continuous and slightly interrupted cut
PROP65: This product contains chemicals known to the State of California to cause cancer. For more information: www.P65Warnings.ca.gov