SCMT 866-OR:T9325 TURNING INSERT - POSITIVE
SCMT 866-OR:T9325 TURNING INSERT - POSITIVE
PRA6754001
6754001
54.74
/ EA
http://schema.org/OutOfStock
/Product/PRA6754001
- Applicable Materials: Cast Iron, Stainless Steel, Steel and Titanium/Super Alloys
- Chipbreaker: OR
- Corner Radius: 2.4mm
- Hole Diameter: 8.7mm
- Included Angle: 90°
- Inscribed Circle: 25.4mm
- Insert Size: 866
- Insert Style: SCMT
- ISO Code: SCMT 250924E-OR T9325
- Material: Carbide
- Material Grade: K, M, P, S
- Maximum Depth of Cut Decimal Inch: 0.63
- Maximum Depth of Cut Metric: 16.0
- Rake: Positive
- Relief Angle: 7°
- Seat Size: 25
- Shape: Squared
- Surface Treatment: CVD Coated
- Thickness: 9.52mm
- Type: 25.4mm
- ANSI Code: SCMT 866-OR T9325
- Has Attributes: Yes
- Has Image: Yes
- Manufacturer Grade: T9325
- Width: 25.4mm
Single-sided positive turning insert, square with 7° clearance, inscribed circle diameter of 25.4mm, 9.52mm thick, 2.4mm nose radius, indexing accuracy according to ISO-tolerance class-M, chip-breaker OR with rounded cutting edges, in grade T9325, a MT-CVD coated functionally graded WC-Co carbide within ISO ranges P15-P35 and M10-M30, for heavy to extra heavy machining of steels and stainless-steels
- Application
- Item Features
- Standards
Heavy Roughing and Finishing
- T9325 grade functionally gradient substrate
- Relatively low content of cobalt binder phase
- Thick MT-CVD coating
- Highly versatile material with very good operational reliability
- Special surface finish for coating
- Medium and higher cutting speed
- Continuous and interrupted cut
- Unfavorable cutting conditions, continuous and/or interrupted cuts
- Cutting geometry suitable for grooving and axial turning
- For fine turning and finishing
PROP65: This product contains chemicals known to the State of California to cause cancer. For more information: www.P65Warnings.ca.gov